国产卡一卡二卡3卡四卡精品_mvp情人优酷_大学生无套带白浆嗯呢啊污_亚洲精品久久7777777国产_韩国伦理片在线2018_黄sei片网站_美女成人网_亚洲精品色情AAA片_亚洲网址在线_香蕉视频污在线观看_午夜精品久久久久久久久日韩欧美_四季在线观看免费资源_btv养生堂_亚洲国产中文在线视频_日本精品一区二区三区在线_野花高清在线观看免费高清_...中文天堂在线观看_亚洲精品久久久久久久不卡四虎_地心历险记1快播_暖暖 免费高清 日本

Welcome to the official website of Wuxi High Speed Analytical Instrument Co., Ltd.!
中文    English
Sales hotline+86 510 83202007
+86 510 83202173

Infrared detection device of infrared carbon and sulfur analyzer

Release time:2020-09-30 Views:1783 來源:本站

1. Turn on the power of the detection device, the light on the switch is off, there is no indication of the upper and lower temperatures, and the fuse is broken. Replace the fuse.
2. Start-up In the carbon and sulfur data frame, the carbon pool value and sulfur pool value will not change. Generally speaking, such failures are caused by no serial data. The check methods are as follows:
(1) Turn off all power supplies, and repeat the operation several times in accordance with "Operation steps from turning on to normal operation", the signal data is still not displayed on the screen.
(2) Turn off the power and check whether the serial connection plug is loose. Unplug the cable and plug it in again. No data continues to be transmitted after turning on the power.
(3) Use an extended circuit board to lead out the main board in the control box, use a multimeter to measure whether the main board's 5V power supply is normal, if not, check the power board. It is judged that the 89C51, GAL, and 232 chips on the motherboard may be damaged.
(4) The above inspections are all normal. Turn on the power and observe the data in the carbon data box on the screen. It means that the A/D7135 chip and its peripheral circuits corresponding to the carbon pool are good. On the contrary, there may be a problem with the components on the sampling board or the 8155 chip on the main board, the ±5V power supply for A/D is not good, and the printed circuit board is inserted reversely.
(5) In the above inspection process, if it is judged that the chips or the power supply have problems, the solution is to replace the chip or replace the corresponding printed circuit board.
3. There is serial data transmission, but the carbon pool or sulfur display signal value is abnormal. The inspection method is as follows:
(1) If the data is 2V or greater, there must be a problem with the 7135 chip or its peripheral circuit on the corresponding A/D sampling board.
(2) If the data on the upper screen jumps randomly, you must use a digital multimeter to test at the same time. If the numbers on the multimeter are normal, it means there is a problem with the device on the sampling board. If the measurement data of the multimeter is also abnormal, there may be a problem with the corresponding front plate.
(3) If the displayed data is very small and below 0.05V, there may be a problem with the light source or modulation motor in the corresponding measuring cell. At this time, you can first observe whether the voltages of the two in the F2 function are normal. To check whether the motor is normal or not, you can judge whether there is a slight vibration by pressing and holding the motor.
主站蜘蛛池模板: 灯塔市| 安溪县| 阳曲县| 云安县| 扶风县| 邛崃市| 兴宁市| 花垣县| 平阴县| 秦皇岛市| 博乐市| 宜宾市| 阜南县| 行唐县| 兴安县| 陈巴尔虎旗| 龙胜| 衡山县| 清苑县| 高唐县| 米泉市| 长岭县| 成武县| 永登县| 巴彦县| 理塘县| 滦平县| 郓城县| 巫山县| 博野县| 咸丰县| 宽甸| 界首市| 湖北省| 台北县| 邵武市| 札达县| 阳曲县| 固镇县| 蒙山县| 新竹市|